2022 Caterpillar Diesel Generator Sets CM20C
- Year 2022
- Make Caterpillar
- Model Diesel Generator Sets
2022 Caterpillar Diesel Generator Sets CM20C
2022 Caterpillar Diesel Generator Sets CM20C
Producing reliable power from 985 to 1650 kWe, each generator set has been designed to meet World bank (WB) emission certification stage 2. The CM20C 50 and 60 Hz, 6, 8 or 9 cylinder, turbocharged-aftercooled generator set, is designed for Ultrafast start time and load acceptance, low fuel and oil consumption requiring low maintenance.
OVER 1,600 DEALER LOCATIONS WORLDWIDE
Cat dealers in over 190 countries provide parts, service & warranty support to ensure maximum productivity
WORLD BANK (WB) EMISSION CERTIFICATION STAGE 1 AND 2POST-EMISSION TREATMENT SYSTEMS FOR LOWER EMISSION REQUIREMENTS AVAILABLE
Features may include:
- Reliable Operation
- Control & Monitoring
- Ease Of Installation
- Ease Of Operation
- Intelligent Simplicity
- Ease Of Maintenance
- Fuel
- Emissions
- Expertise & Experience
- World Wide Product Support
Engine
Engine Type
Model: CM20C, 4-stroke-engine
Bore
7.87 in
Stroke
11.81 in
Emissions
/Fuel Strategy: (WB) Stage 1 and 2
Aspiration
Turbocharged-aftercooled
Fuel System
Fuel Type
Diesel oil / heavy fuel oil (HFO) / crude oil
Electric
Electrical
Minimum Rating: 985 kWe | Maximum Rating: 1650 kWe | Voltage: 3000 to 13800 Volts | Engine Rating Range: 1020 - 1710 kW
Operational
Operating Speed
Frequency At Speed: 50 Hz @ 1000 / 60 Hz @ 900
Operating Conditions
Ready To Accept Loads (Preheated/Vented): 40 s | Normal Ramp Up To 100% Load: 75 s | Emergency Ramp Up 10% To 100% Load: 25 s | Genset Efficiency Up To: 43.10% | Specific Fuel Oil Consumption (WB I) Up To: 0.417 Ib/kWh | Specific Fuel Oil Consumption (WB II) Up To: 0.417 Ib/kWh | Specific Lube Oil Consumption: 0.001 Ib/kWh
Hydraulics
Maximum Pressure
Mean Effective Pressure Up To: 351 psi
Dimensions
Height
Minimum: 112 in | Maximum: 119 in
Length
Minimum: 239 in | Maximum: 281 in
Width
Minimum: 66 in | Maximum: 71 in
Capacities
Volume
Swept: 575 in³
Weights
Weight
Genset (minimum): 41447 lb | Genset (maximum: 66139 lb
Features
Features
Duty Cycle: Prime, Continuous | Configuration: 6,8,9 cylinder